Electric SC10 Tranny Modification

[jmsmith87]

What do I need to do to mount it into a CW GBX2? The spacer on the chassis is to high. Do I need to mount the electric motor mount directly onto the case?

[shmeedel]

What do I need to do to mount it into a CW GBX2? The spacer on the chassis is to high. Do I need to mount the electric motor mount directly onto the case?


If you are using the GFRP B3 sc10 case you need to remove the CW spacer on the chassis and it will bolt in. I also used no spacer in between the motor plate and the trans. Hope this helps.

Marc

[teddy]

I put the tranny on the spacer. But i put a couple spacers under the tank brace. No spacers for the motor plate

Bob

[CTEK]

I made a new spacer out of .060 (1/16) thick carbon fiber I had from an old shock tower and everything lined right up. I've been running mine in my GBX-2 for about 4 weeks without any issues.:thumbsup: