spoiler for 1/8

[dirtracer20]

can i get a drawing for a spoiler for a 1/8 late model and mesurements for the side dams

[Ovaloldtimer]

can i get a drawing for a spoiler for a 1/8 late model and mesurements for the side dams


I could be wrong but i think this is what most are running
http://ottsspeedshop.com/familyrctemplet.html

[CBR]

copied and pasted from MCR rules:
SIDE DAM 5" HIGH OFF OF DECK BY 17" LONG- MAY HAVE 1/2 IN. (WICKER) BEND AT TOP- MUST BE 3" BEHIND CENTER OF FRONT AXLE-MAY NOT EXTEND BEHIND REAR SPOILER-MUST HAVE 2 BRACES AT LEAST 6" APART AND BE 1 1/2" WIDE. SIDE DAM MUST BE AT A 90 DEGREE ANGLE TO THE DECK. NO FLOPPING SIDE DAMS ALLOWED, ALL EDGES MUST BE ROUNDED FOR SAFETY

REAR SPOILER 3" MAX FROM DECK, MAY HAVE 1/2 (WICKER) BEND AT TOP [/SIZE]
MAY HAVE RIGHT SIDE BRACE FOR SPOILER-MUST NOT EXTEND FARTHER THAN 3" FORWARD OF SPOILER BASE MAY HAVE 1 ADDITIONAL SPOILER BRACE NO LARGER THAN RIGHT SIDE NO TALLER THAN SPOILER ALLOWED ANYWHERE ON REAR SPOILER

http://www.nashrcracer.com/forum/viewtopic.php?t=3502

[dirtracer20]

ok thanks i got it on ill find out if its right or not sunday