New here, and looking forward to coming to race.

[sjgriz18]

Howdy all,

I have been doing some research and getting ready to get back into racing. I have been out for a few years and just getting everything ordered to get started again. I plan on running in the nitro truck class with a basically stock RC10 GT w/ some minor hop-ups. Is something that I will get my but handed to me with or is this class pretty even on the cmpetition. What are the motor rules, and anything else that I might need to know? I am driving a little over three hours to race with you guys and I would like to come prepared. There is only one track over here that is a dirt oval and that is the racing i like. My home track is here likes the road coarse beat and bang w/ jumps. Thanks for any info

[voodoo427]

We will run trucks and edm's in the same class. Must be .12 to .18 motors. Must be 2WD. May run truck or edm body. Rear spoiler is permitted 2" Max. Side air dams are permitted on Truck Bodies only. Left side Air Dams - form A-pillar to rear of body but not past spoiler. 4" in height. No Right side air dams. Any 2.2 tires may be used. NO FOAM TIRES. Series rules do not apply.

EDM'S
ALL BODIES MAY HAVE A 2 INCH REAR SPOILER MEASURED AT THE CHORD AND NO WIDER THAN THE BODIES REAR DECK AREA.
ALL EDM BODIES WILL NOT RUN A SIDE DAM, BUT MAY RUN A SAIL PANEL THAT FOLLOWS THE ROOF LINE AND MUST NOT BE ANY TALLER THAN THE ROOF. MAY NOT ATTACH A SAIL PANEL TO THE BODY, IT MUST BE BUILT IN TO IT'S DESIGN.
NO RIGHT SIDE DAMS WILL BE LEGAL, SMALL WINGLETS ARE ACCEPTABLE BUT MAY NOT BE SQUARE IN SHAPE.
ANY SMALL BLOCK ENGINE UP TO .18
ALL VEHICLES MUST RUN PINNED/RIBBED TRUCK TIRES AND TRUCK WHEELS FRONT AND REAR. 2.2 INCH MAX RIM SIZE.
WHEEL BASE 10.75 - 12.5
MAX WIDTH -13.0
MIN WIDTH -11.0
75 CC TANK MAX.
2WD ONLY AND NO 2 SPEEDS AND REAR WHEEL DRIVE ONLY.