CW GBX/Putnam Pro Car Conversion Kit

[Todd Putnam]

Conversion Kit converts a Custom Works GBX to a 2008 6/2 Putnam Pro-Car. :checkeredflag:

Kit Includes:

-2008 6/2 Proprietary "Flex-Tech" Carbon Fiber Chassis Plate
-Aluminum Front Kickup
-Delrin Bell Cranks w/ Standoffs, and (4) Bearings
-Molded RPM Center Link
-Titanium Tie Rods w/ Heavy Duty Ball Cups
-Titanium Camber Links w/ Heavy Duty Ball Cups
-Machined Delrin Front Bulkhead
-Machined Delrin Front Arms
-Carbon Fiber Front Shock Tower
-Carbon Fiber Front Suspension Brace
-Front Inner Hinge Pins
-Front Outer Hinge Pins
-Caster Blocks
-Steering Blocks
-Aluminum Front Axles
-CW #2224 Aluminum Mount
-Carbon Fiber Rear Shock Tower/Bulkhead
-Aluminum Anodized Washers and Nuts in Red, Black or Blue-(Pictured)
-Assembly (For a Limited Time only)
-Set Up Sheet

Utilizes CW GBX:

-Transmission
-Aluminum Transmission Spacer
-Carbon Fiber Transmission Brace
-Carbon Fiber Rear Body Mount
-Aluminum Rear Toe Blocks
-Rear Arms
-Rear Axle Carriers
-CVD's
-Rear Camber Links
-Rear Camber Link Standoffs
-Shocks

Part #GBX-PPC $375.00 Assembled

[R Keeney]

I just got mine in today and all I can't wait to get my car assembled. The pictures just don't do the kit justice, they look even better in person.

Hey Todd, I sent you a message earlier also.

Robert Keeney

[Todd Putnam]

I just got mine in today and all I can't wait to get my car assembled. The pictures just don't do the kit justice, they look even better in person.

Hey Todd, I sent you a message earlier also.

Robert Keeney

Sent you the setup data you requested. One thing I forgot to mention though, Robert:

Before you run the Pro-Car for the first time, be sure to clean off a spot on the mantle for the following: :trophy::checkeredflag:

Have fun and let me know if you have any questions... :thumbsup:

[Nitehawk]

Is that my car??? cant wait to turn some laps with it.

[R Keeney]

Todd:

You've got a message.

Thanks again for a killer car:thumbsup::D

Robert Keeney

[OBrien]

todd sent ya an email

[R Keeney]

Todd:

I've got the Pro Car together and am really impressed with it.

You have a message with some questions for you.

R Keeney

[staatsbmxkid]

haha just noticed this sorry for the email asking if this very product existed todd... cant wait to get some laps in with my cw i am getting and then get this kit in spring or eairly summer :-)

[jaybird 52]

that is sweeeeeet chassis how much isthe kit:D:thumbsup::checkeredflag:

[KUSTOM-1]

that is sweeeeeet chassis how much isthe kit:D:thumbsup::checkeredflag:


Look up at 1st post, For price.

[jaybird 52]

can i buy just the parts to convert my gbx:D:thumbsup::checkeredflag:

[glgraphix]

can i buy just the parts to convert my gbx:D:thumbsup::checkeredflag:
Jaybird, you can get all the parts in a kit, same as what is at the top of the page. YOU would just ask to not have TP build it for you.
Hope that answers you question.
Kevin

[staatsbmxkid]

hey todd. figured id throw message on here since i didnt wanna wait till monday at track. lets say i decided to break down and pick up this here conversion. would it be possable to get the turnbuckles annodized red with the red screw an nut set up and maybe white turn buckle ends.. not to be difficult just curious if these were possable to custom order?

[irocz69]

:thumbsup:Conversion Kit converts a Custom Works GBX to a 2008 6/2 Putnam Pro-Car. :checkeredflag:

Kit Includes:

-2008 6/2 Proprietary "Flex-Tech" Carbon Fiber Chassis Plate
-Aluminum Front Kickup
-Delrin Bell Cranks w/ Standoffs, and (4) Bearings
-Molded RPM Center Link
-Titanium Tie Rods w/ Heavy Duty Ball Cups
-Titanium Camber Links w/ Heavy Duty Ball Cups
-Machined Delrin Front Bulkhead
-Machined Delrin Front Arms
-Carbon Fiber Front Shock Tower
-Carbon Fiber Front Suspension Brace
-Front Inner Hinge Pins
-Front Outer Hinge Pins
-Caster Blocks
-Steering Blocks
-Aluminum Front Axles
-CW #2224 Aluminum Mount
-Carbon Fiber Rear Shock Tower/Bulkhead
-Aluminum Anodized Washers and Nuts in Red, Black or Blue-(Pictured)
-Assembly (For a Limited Time only)
-Set Up Sheet

Utilizes CW GBX:

-Transmission
-Aluminum Transmission Spacer
-Carbon Fiber Transmission Brace
-Carbon Fiber Rear Body Mount
-Aluminum Rear Toe Blocks
-Rear Arms
-Rear Axle Carriers
-CVD's
-Rear Camber Links
-Rear Camber Link Standoffs
-Shocks

Part #GBX-PPC $375.00 Assembled

Todd, did you have the front plate & rear bulkhead plated or did someone polish them. If they polished them, i'd like to know what was used ! Nice job:thumbsup:

Keith S.

[staatsbmxkid]

mothers aluminum polish with lil elbow greese or a dremil and polish bit will do that in matter of few min

[irocz69]

mothers aluminum polish with lil elbow greese or a dremil and polish bit will do that in matter of few min

Thanks

[Todd Putnam]

hey todd. figured id throw message on here since i didnt wanna wait till monday at track. lets say i decided to break down and pick up this here conversion. would it be possable to get the turnbuckles annodized red with the red screw an nut set up and maybe white turn buckle ends.. not to be difficult just curious if these were possable to custom order?

We can get you the aluminum parts anodized in many colors, but titanium doesn't color well. As for white ball cups, not unless you want them "dirt" colored after the first week...:thumbsup:

[Todd Putnam]

:thumbsup:

Todd, did you have the front plate & rear bulkhead plated or did someone polish them. If they polished them, i'd like to know what was used ! Nice job:thumbsup:

Keith S.

Yup, what Darrin said. Buffing wheel, polish and some elbow grease and you can make it look like chrome.:thumbsup:

[dirtsurfer5]

Not only are these car the most advanced in engineering, but the fastest on the track. My Pro Car conversion continues to knock um down now as a Tea's super late model, taking the TQ and win this past Saturday at Tea's Raceway Park in Chester, MN.


Cudo's to TP and the rest of the team!!

[staatsbmxkid]

lol cant wait to see how one of these perform if i can manage to get one :rolleyes: well yea the dirt colored would suck but would be nice to see if they cleaned up well. if we could try to get some red turnbuckles that would be cool though. see ya at track mon hopefully and ill be there sunday doing a lil shakedown:checkeredflag:

[spdrcer1]

matt thats cause i aint been there with my DYNO-TECH yet! ha ha ha

[Hotrodracer]

Conversion Kit converts a Custom Works GBX to a 2008 6/2 Putnam Pro-Car. :checkeredflag:

Kit Includes:

-2008 6/2 Proprietary "Flex-Tech" Carbon Fiber Chassis Plate
-Aluminum Front Kickup
-Delrin Bell Cranks w/ Standoffs, and (4) Bearings
-Molded RPM Center Link
-Titanium Tie Rods w/ Heavy Duty Ball Cups
-Titanium Camber Links w/ Heavy Duty Ball Cups
-Machined Delrin Front Bulkhead
-Machined Delrin Front Arms
-Carbon Fiber Front Shock Tower
-Carbon Fiber Front Suspension Brace
-Front Inner Hinge Pins
-Front Outer Hinge Pins
-Caster Blocks
-Steering Blocks
-Aluminum Front Axles
-CW #2224 Aluminum Mount
-Carbon Fiber Rear Shock Tower/Bulkhead
-Aluminum Anodized Washers and Nuts in Red, Black or Blue-(Pictured)
-Assembly (For a Limited Time only)
-Set Up Sheet

Utilizes CW GBX:

-Transmission
-Aluminum Transmission Spacer
-Carbon Fiber Transmission Brace
-Carbon Fiber Rear Body Mount
-Aluminum Rear Toe Blocks
-Rear Arms
-Rear Axle Carriers
-CVD's
-Rear Camber Links
-Rear Camber Link Standoffs
-Shocks

Part #GBX-PPC $375.00 Assembled

todd was looking for a used putnam car to race at radio hill, was wondering if you knew where one was rtr complete less batts?

[cnyrcer]

Doug...you have pm....let me know!....:thumbsup:

[Todd Putnam]

todd was looking for a used putnam car to race at radio hill, was wondering if you knew where one was rtr complete less batts?

I have a Pro-Terminator in stock, and can sell it a few different ways. Call me at the shop 9-5 and we can discuss it in detail.:thumbsup:
Thanks.
(518) 452-0422