Need Help Asap....

[BIG BUBBA]

I Have A Putnam Car And Run Latemodel At My Local Track. I'm Still Somewhat New, So Here's My Question. Should Both Of My Rear Camber Links Be The Same Length And In The Same Holes On Each Side??? Any Help Would Be Appreciated.

[races65]

Bubba-

You may want to ask this question down in the Putnam Section.

[rcer6x]

Bubba,

The answer to your question is yes they should be in the same holes in the bulkhead...that is a good starting point. As for the length...you should have the right rear set at -1 to -2 deg of neg camber....the left rear set at 0 to +1 deg. I have found that dropping the right rear inner link increases forward bite.


If you have any more questions...dont be afraid to ask in the putnam thread! We are always available to help! Good Luck!

[BIG BUBBA]

Thanks Guy's. I Talked To Todd Right Before Lunch And He Also Put Me On The Right Path. Once Again Thanks A Ton..

[reghammer]

Just in case your comming to C&S tomorrow i'll be there if you need any more assistance

Reggie

[glgraphix]

TP, you got a PM coming your way. Good news :D :thumbsup:
Kevin

[BIG BUBBA]

thanks once again guys, i took everyones advice and it really helped a ton. my car was finally able to turn in and off, i.e. really drivable. great post and peep's to get in on. PUTNAM RULES..