Welcome GoFast Race Parts & HyperDrive

[Doug Carter]

Welcome to Dustin and the boys from GFRP as the newest main sponsor of the DirtOval.com forums. Glad to have you guys aboard. Hope this can be a great place for you to debut new products and interact with your customers.

Glad to have you here and participating... :thumbsup:




doug

[Raymond McCoy]

Dustin,
What do I need from you if I got the conversion kit from Barry? I know about arms stuff like that. I need to know about tranny case(I want to run 2.60 so I am going to order stuff from you but I want to get all I need at once)? motor plate? body? wing? side panels?

Raymond

[Team GFRP]

Dustin,
What do I need from you if I got the conversion kit from Barry? I know about arms stuff like that. I need to know about tranny case(I want to run 2.60 so I am going to order stuff from you but I want to get all I need at once)? motor plate? body? wing? side panels?

Raymond


The motor plate you will need and if running stock probably the alum. outdrives to go in the tranny.

As for the body and wing I would suggest just picking up a CW wing and body kit. We are still working on the design of the cage. Once we get the cages done then we will figure out a body for it.

If you need any other questions answered don't hesitate to ask.

thanks

DM

[Raymond McCoy]

Thanks Dustin! I will order the tranny case and motor plate today. I will be running mod so no need for alum. outdrives :)

Thanks,
Raymond

[Team GFRP]

I believe Barry has all of the stuff in stock. If you want to just get everything from him in one shot.

thanks

DM

[Raymond McCoy]

Bummer he didn't say anything about having the tranny case and motor plate. O-well I ordered it off your site.

Raymond

[Raymond McCoy]

Just got my HAVOC SC done today!

Dustin, what are you using for hoods? With spreading the cage out the hood is to narrow now. Thanks for your help and Sonny B for sending me pics :)



Raymond McCoy

[Team GFRP]

We made a few hoods before the OW. I need to modify the mold a little to get the hoods to fit properly. I'm hoping to have the mold back in my hands next week. It will take about a week to get it fixed. Once I get it fixed I will ship it back to the guy that is pulling the lexan and hopefully we will have hoods available that fit properly.


The car looks good. Could you send me some pics of how you did the front. I'm looking for ways to make a good looking front piece.

Thanks

DM

[Raymond McCoy]

Dustin,
When I get home later I will shoot a few pics and send them your way.


Raymond

[Stetler17]

Nice looking car Raymond...

In the pics the hood looks fine. Your nose piece also flows well into the design, well done.

[Raymond McCoy]

Thanks man! It looks fine from the side but I don't like the gap on each side of hood from top. Nobiggie it will look just fine running around the track :)

Raymond

[Team HHS]

Nice looking ride. I agree with Stetler and Malicoat. I really like the nose piece. I tried to use the cut off part of the cage, but it was just too fragile up there. Keep us informed on how good you do with it.


George

[Raymond McCoy]

I will let you know how it works out. There is a piece of kydex under it for a bumper I just shoe gooed the CW bumper to that. if I had a bigger piece of kydex I would have bolted it to it. I still can on front it shoe goo doesn't hold. I just wanted it to look like it had a bumper with out a huge bumper bolted on :)
We'll see how it works on Sat :):checkeredflag:

Raymond

[huffrcman]

Dustin could you take some aluminum tubing and make some U shaped pieces?

BTW Happy Birthday!!!

[Raymond McCoy]

Dustin, pics sent!

Raymond McCoy

[Raymond McCoy]

few more pics.
Just got the front wing mounted up today. Works great and don't even need to remove it to take hood off but (2) nuts and it's off if you want.

Raymond

[Raymond McCoy]

Dustin, do you have any Havoc stickers?

Raymond

[Team GFRP]

yip I can get you some sent out tomorrow.

thanks

DM

[Raymond McCoy]

Thanks Dustin!!!!


Raymond

[rockfordccinc]

in the SC kit there are 2 pieces that are for the cage i used one for the part around the rear tank but where does the other go

[Stetler17]

rockford.

Are you refering to the extra carbon fiber pieces? If so the second one is a mount for the tail tank.

[Raymond McCoy]

Yeah I didn't see where I could use it either:confused: (I used the CW mount for tail tank) Now I have an extra piece of CF LOL

Raymond

[Stetler17]

I used the CW mount too. With a slight modification it makes a very clean installation.

[jwag1]

Hello everyone. I'm new to dirt oval and I was wondering who or where do I need to contact to purchase one of these sprint cars. I went to the hyperlink above the thread and left a message on the website but no one ever responded back. I am interested in buying a complete car if possible. If anyone has any information, my e-mail address is je26m@yahoo.com Thanks in advance for your help. Jeff.

[Raymond McCoy]

Hello everyone. I'm new to dirt oval and I was wondering who or where do I need to contact to purchase one of these sprint cars. I went to the hyperlink above the thread and left a message on the website but no one ever responded back. I am interested in buying a complete car if possible. If anyone has any information, my e-mail address is je26m@yahoo.com Thanks in advance for your help. Jeff.

I don't think the complete cars are 100% ready to ship yet. Contact Barry Hill www.hyperdriveracing.com (http://www.hyperdriveracing.com) just give him a call or shoot him an e-mail both # and e-mail are on websites front page.
Barry's e-mail barry@hyperdriveracing.com
Raymond

[Team GFRP]

The two pieces of carbon fiber that look the same are the same piece. We decided that we would include an extra rear bumper mount so if you break the first one you will have an extra. Just a simple thing to prevent people from having to purchase extra's immediatly.

Jeff I must have missed your email... I will send you some more info.

thanks

dm

[rockfordccinc]

Dustin,
where can the hoods be purchased
thanks
David dick

[Team GFRP]

Dustin,
where can the hoods be purchased
thanks
David dick

I have the mold about finished on the rework of it. I will have to send the mold back to NY and then we should have proper fitting hoods.

thanks

DM

[37RACING]

these cars look pretty trick?Do these have removable cage?

[Team GFRP]

I am going to try to incorporate the removable cage idea into the new cage design.

[37RACING]

So whats going to be the price on these sprinter/edm?

[midwestrc52]

Can you get the Havoc chassis with the sprint car cage or is that bought seperate? And what cage fits? Thanks

[Raymond McCoy]

Yes you get the Havoc conversion kit and then you get other parts you will need. CW cage fits with few mods :)

Raymond

[JasonAB25]

Dustin, Let me know if you got that order i sent over to ya. Thanks

Jason Abernathy