Todd Putnam
September 13th, 2007, 8:25 PM
Here are some more new products from Putnam Propulsion. Many of you have seen the prototypes of these parts - as well as their revisions. The wait is over, and they are now available...
-New 2008 Pro-Car Chassis Plate: This new chassis plate offers the option of mounting 1-2 cells on the right hand side, or speedo, receiver, etc. Reduces left side bias and increases rear percentage for increased front traction on corner entry and rear traction/forward bite on corner exit. Cut from Proprietary Putnam "Flex Tech" Carbon Fiber.
-Delrin Composite Terminator Front Arms: These are machined from a Delrin Composite for increased strength and wear versus nylon, standard delrin, etc; Available in both "Standard Geometry" length as well as .125" / 1/8" NARROWER version.
-Carbon Fiber Motor Plate: Fits Associated and Custom Works 2.40 Stealth Trans Cases. Lowers Motor over .100" for lower center of gravity.
-Carbon Fiber Front Suspension Brace: Same as our Aluminum Front Suspension Brace, but cut from Carbon Fiber. Fits All Terminator Front Suspension Mounts/Bulkheads. Protects Front Suspenion Mounts and Hinge Pins from damage from frontal impact. Longer Hinge Pins Included.
-0/2 Degree Terminator Rear Toe Blocks: Made from 2024 Aluminum, these rear toe blocks offer 0 degree or 2 degree of rear toe in without having to purchase or change to a different pair of blocks - just move your 4-40 screws from one set of mounting holes to another to change from 0 to 2 degrees. Also includes 4-40 set screws over the hinge pins to lock the pins from rotating in the toe blocks-hinge pins that rotate against aluminum gaul and prematurely wear out both the toe block and hinge pins. This insures that the arms pivot on the hinge pin.
-Aluminum Terminator Front Arms: Machined from 2024 Aluminum to the Standard Terminator Geometry. Lighter, higher quality and more durable than stock arms.
-1/18th Modified Motors: Make your 1/18th SCREAM with our new line of Mod Motors. Available in 14,16,17,22,and 33 turns to fit any application. These will fit Losi Sliders, Losi Mini-T, Associated 18T, HPI RS4, X-Ray 18, etc; We also offer a complete line of replacement brushes, springs, arms, ceramic bearings, etc;
________
Justin Bieber Fan (http://justinbieberfan.info/)
-New 2008 Pro-Car Chassis Plate: This new chassis plate offers the option of mounting 1-2 cells on the right hand side, or speedo, receiver, etc. Reduces left side bias and increases rear percentage for increased front traction on corner entry and rear traction/forward bite on corner exit. Cut from Proprietary Putnam "Flex Tech" Carbon Fiber.
-Delrin Composite Terminator Front Arms: These are machined from a Delrin Composite for increased strength and wear versus nylon, standard delrin, etc; Available in both "Standard Geometry" length as well as .125" / 1/8" NARROWER version.
-Carbon Fiber Motor Plate: Fits Associated and Custom Works 2.40 Stealth Trans Cases. Lowers Motor over .100" for lower center of gravity.
-Carbon Fiber Front Suspension Brace: Same as our Aluminum Front Suspension Brace, but cut from Carbon Fiber. Fits All Terminator Front Suspension Mounts/Bulkheads. Protects Front Suspenion Mounts and Hinge Pins from damage from frontal impact. Longer Hinge Pins Included.
-0/2 Degree Terminator Rear Toe Blocks: Made from 2024 Aluminum, these rear toe blocks offer 0 degree or 2 degree of rear toe in without having to purchase or change to a different pair of blocks - just move your 4-40 screws from one set of mounting holes to another to change from 0 to 2 degrees. Also includes 4-40 set screws over the hinge pins to lock the pins from rotating in the toe blocks-hinge pins that rotate against aluminum gaul and prematurely wear out both the toe block and hinge pins. This insures that the arms pivot on the hinge pin.
-Aluminum Terminator Front Arms: Machined from 2024 Aluminum to the Standard Terminator Geometry. Lighter, higher quality and more durable than stock arms.
-1/18th Modified Motors: Make your 1/18th SCREAM with our new line of Mod Motors. Available in 14,16,17,22,and 33 turns to fit any application. These will fit Losi Sliders, Losi Mini-T, Associated 18T, HPI RS4, X-Ray 18, etc; We also offer a complete line of replacement brushes, springs, arms, ceramic bearings, etc;
________
Justin Bieber Fan (http://justinbieberfan.info/)