PDA

View Full Version : ? Before making trip from WI to race

TrackKat
June 10th, 2007, 11:51 PM
Hey guys I will be comming out to PA from WI August 2-6th and I would like to know a few things, I have a Klein Sprint car with RC10gt arms and an OS .18 cv-r, will this be ok to run? also is Rays Place RC Speedway still running? i see the site wasnt updated since 05.
sprinter117
June 11th, 2007, 3:26 PM
Hey guys I will be comming out to PA from WI August 2-6th and I would like to know a few things, I have a Klein Sprint car with RC10gt arms and an OS .18 cv-r, will this be ok to run? also is Rays Place RC Speedway still running? i see the site wasnt updated since 05.


What is the width of your car? I think the motor is going to be an issue just about everywhere .... .12 or .15 is the norm in this area for motor size. what part of pa are you going to? I do not want to discourage you from trying to race if you let me know ahead of time where you plan on running I will check with the tracks before you get here . Ray's Place is closed as far as I know but Trains and lanes is in the (roughly) in the same area. All the tracks around here (Newville,Staub Brothers',Bumps and Jumps,Trains and Lanes,Liberty Valley) are great places to race ! If I can help out in anyway just drop me a pm :D


-Bill
TrackKat
June 11th, 2007, 10:50 PM
Montgomeryville PA is where we will be staying, and my sprinter is 13" wide w/ tires on. Also i plan on getting a .12 for it before then too so that isnt a big deal.
Animal
June 11th, 2007, 11:00 PM
Montgomeryville PA is where we will be staying, and my sprinter is 13" wide w/ tires on. Also i plan on getting a .12 for it before then too so that isnt a big deal.


what car are you running? or are you planing to bring with you? if its just a standard Sprint car kit, and not a truck conversion you should have no issues, except for the engine
TrackKat
June 11th, 2007, 11:21 PM
It is a Klein Car, but it has RC10gt arms on it, and I was just wondering if i could use those arms or if i would need to convert it fully before i make the trip?
ctsieber
June 12th, 2007, 7:52 PM
It is a Klein Car, but it has RC10gt arms on it, and I was just wondering if i could use those arms or if i would need to convert it fully before i make the trip? measure the width.
TrackKat
June 12th, 2007, 8:37 PM
13" wide
ctsieber
June 12th, 2007, 9:36 PM
the rules say thats to wide
13" wide
Tom S
June 12th, 2007, 9:54 PM
Ray's Place is closed. Head up to Trains and Lanes in Easton.
TrackKat
June 12th, 2007, 10:39 PM
Sweet thanks a bunch thats only 1 hr from where we r staying! :thumbsup::thumbsup::thumbsup: