Redneck RC Racing this Friday night! 4/4/07

[RCRACR20]

This Friday night we will begin our outdoor dirt oval season at our Oswego NY location. The weather looks like its gonna cooperate. Track opens around 4-4:30 and we will begin racing at 7:30.

We will also begin our offroad season this Saturday (4/5/07), track opens at 10am, racing begins at Noon.


$5 per class, either day. Any questions, please call the shop at (315) - 532 - 6826



Redneck RC
80 Dutch Ridge Rd
Oswego NY 13126

[beastman]

ill come down check my competion if i ever get my truck up and running wich should be soon...




what are the rules for gas truck anyways?

[Junior]

ill come down check my competion if i ever get my truck up and running wich should be soon...




what are the rules for gas truck anyways?

Here are the truck rules from the RC Pro Series. They are having a race at Redneck in July and Matt said they would be running their rules. I won't be able to make it this Friday, but hope to be able to get up there soon.






Pro Truck

Dimensions/Weight Overall length, including bumper 22”
Wheelbase: 11.0 - 12.5"
Max Width: 13”
Min Width: 11.0”
Minimum weight 64oz. (may be weighed at any time)

Body/Chassis
ANY CHASSIS providing Truck length a-arms are used on all four corners and you meet the dimensions requirements.
Single speed, rear drive 2WD ONLY.
Truck Bodies ONLY. Oval truck bodies ARE ALLOWED.
Left side panel may not extend forward of the roof “A” pillar, be higher than 2” above the roof, including spoiler, nor extend beyond the rear of the body, including spoiler.
Maximum roof spoiler, ½”
Maximum rear spoiler cord 3”, and may not be wider than the rear of the body.
Maximum Height 8" measured from the bottom of the chassis.
Spoiler must be attached to the body -- no spoilers directly attached to the suspension.
Windows may be cut out.
Openings for access to fuel tank, carburetor, and glow plug may be cut in body.
Front bumper must be made of energy absorbing material (nylon/kydex/foam), must be securely attached to the chassis, and may not be wider than the front of the body.

Engines/Exhaust
Any small block 3 port.12, or .15 RTR engines.
Fuel tank:75cc max. Inserts are not mandatory in factory tanks.
Maximum fuel line length from tank to engine,10” including one fuel filter.
Carburetors MUST HAVE a return device (spring, rubber band) to close the carburetor in the event the linkage comes off.
Tuned pipes are ok - no internal moving/adjustable parts.
No homemade or carbon fiber pipes.
One stinger only and must be permanently welded to pipe.
Pipes may only be modified for wire holds or pressure line ONLY

Tires/Wheels
2.2” diameter ONLY .
Rear wheel maximum width 2.5” .
Front wheel maximum width 2.0”
TRUCK TIRES ONLY. NO caps, silicone coated/impregnated, or sectioned tires.
Where foam tires are used, tires/wheels MAY BE trued/narrowed providing they are mounted on 2.2” diameter wheels, and meet the dimensions specified.

[beastman]

lol how about that ACE tuned pipe is that considered home made cuz it looks it

[RCRACR20]

As Keith stated we will be using the RC Pro Series rules as guidelines.


The offroad track is nearly completed....totally different than last years track. Ill try to get some pictures ASAP.

[RCRACR20]

Not sure how many people noticed this....but I ment 5/4/07, not april 4th...sorry for any confusion!