Redneck RC Summer Schedule

[RCRACR20]

Below is the current Redneck RC Summer Schedule. All racing will take place at the Oswego location on the corner of 481 and Dutch Ridge Rd. Included are a few currently planned special events, with the possibility of others being added in the near future.

Dirt Oval:

Friday Nights @ 8PM
-Sign ups end at 7:30
-$5 entry per class
-Classes: SMB and BB EDM Stock, EDM Mod, 2wd Electric Latemodels, Trucks, Sprints, 1/18, Nitro Sprints, Nitro EDMs, Nitro Trucks


Offroad:

Saturdays @ 1:30
-Sign ups end at 1:00
-$5 entry per class
-Classes: 1/8 Buggy, 1/8 Truggy, Monster Trucks, 1/10 2wd Nitro Truck, 1/10 Electric Truck, 1/10 Buggy

** Truggy and Monster Trucks will run together if there is not at least 4 of each**

Onroad:

Mondays @ 7PM
-Sign ups end at 6:30
-$5 Entry per class
-Classes: Stock TC (we'll also run 19T or Mod if turnout allows), 1/12 Stock, 1/18, RC18R Spec, 1/10 electric trucks, Nitro TC



Special Events:

-July 14, 2007 Redneck Roundup Divisional Pro Series Race
-August 18-19 2007 Empire State Dirt Oval Championships (Part of WDRA Tour)

[TQT2]

Pssssst, I bet if you switch Oval on Friday with Offroad on Saturday, you'd have a much larger oval crowd. I know your gonna lose 4 entries on oval for sure....:(.



Keith D

[jeff@vinyltrix]

Pssssst, I bet if you switch Oval on Friday with Offroad on Saturday, you'd have a much larger oval crowd. I know your gonna lose 4 entries on oval for sure....:(.



Keith D

2nd that!! why a 8pm start ?? looking at a late finish..

[solly]

too much stuff going on durring the summer on the weekends, im glad they arent running oval on Saturdays

[10 pins racing]

too much stuff going on durring the summer on the weekends, im glad they arent running oval on Saturdays I think the schedule is fine I believe we will get 4 or 5 nitro sprints on fridays.can't please everybody. I think calvin will be flexable if the days that are advertised don't work out. Are the latemodels stock or19 turn Matt?

[RCRACR20]

Right now, the schedule is final. If it turns out that we need to switch days around, we will, like we did last year by adding Monday nights.

Not sure what to do with 2wd late models, 19turns for now I'm thinking. Its not a class I want to run all the time, but several have expressed interest in it.


the reason for the 8pm start on Fridays is because we currently have 10+ racers from up north who want to run weekly this summer. When you get out of work at 5, have at least an hour drive, it doesn't leave much time for hot laps, grabbing a bite to eat, etc. Calvin and I do our best to accommodate the vast majority, so by starting an hour later, the guys from up north, or out west, will have plenty of time to get out here without feeling rushed. Also, as anyone who ran the Cooper Fuels challenge race knows, our track is about 3 laps fast at night, and everyone hooks up on it a whole lot better. Besides, its a Friday night, its not like everyone needs to be up at 5 or 6 AM the next morning to go to work.

[jeff@vinyltrix]

Right now, the schedule is final. If it turns out that we need to switch days around, we will, like we did last year by adding Monday nights.

Not sure what to do with 2wd late models, 19turns for now I'm thinking. Its not a class I want to run all the time, but several have expressed interest in it.


the reason for the 8pm start on Fridays is because we currently have 10+ racers from up north who want to run weekly this summer. When you get out of work at 5, have at least an hour drive, it doesn't leave much time for hot laps, grabbing a bite to eat, etc. Calvin and I do our best to accommodate the vast majority, so by starting an hour later, the guys from up north, or out west, will have plenty of time to get out here without feeling rushed. Also, as anyone who ran the Cooper Fuels challenge race knows, our track is about 3 laps fast at night, and everyone hooks up on it a whole lot better. Besides, its a Friday night, its not like everyone needs to be up at 5 or 6 AM the next morning to go to work.

your right i go in at 330 am on saturdays.. lol hope to make a bunch of races.

[RCRACR20]

Jeff, your one of the few....but you should be out early every week...we run the lower mains first, remember? :p

[jeff@vinyltrix]

:):d

[Junior]

Friday nights sounds good. Looking forward to running nitro truck and the track should be great with the late start like Matt said. Just installed oval towers and tc3 shocks and can't wait to wring it out. :D really excited about the rc pro series race in July, hopefully, I can get my truck handling.

[lugnut727]

Well the nights are great but the location stinks. It's like 1300 miles from my house.. Whats up with that??????

http://www.dirtoval.com/forums/showthread.php?t=21815 i'm racing here instead. You need a new location!! ;)

[10 pins racing]

Well the nights are great but the location stinks. It's like 1300 miles from my house.. Whats up with that??????

http://www.dirtoval.com/forums/showthread.php?t=21815 i'm racing here instead. You need a new location!! ;)

quick everybody we need to warn new red hobby about jim lucky for them he doesn't have a nitro sprinter If you need mine you'll have to drive up here and get it. oh by the way remount your snow tires:tire:

[Junior]

Will you be running the RC Pro series rules for the Summer season for Nitro Truck?




Here they are, they look fine to me.



Pro Truck

Dimensions/Weight Overall length, including bumper 22”
Wheelbase: 11.0 - 12.5"
Max Width: 13”
Min Width: 11.0”
Minimum weight 64oz. (may be weighed at any time)

Body/Chassis
ANY CHASSIS providing Truck length a-arms are used on all four corners and you meet the dimensions requirements.
Single speed, rear drive 2WD ONLY.
Truck Bodies ONLY. Oval truck bodies ARE ALLOWED.
Left side panel may not extend forward of the roof “A” pillar, be higher than 2” above the roof, including spoiler, nor extend beyond the rear of the body, including spoiler.
Maximum roof spoiler, ½”
Maximum rear spoiler cord 3”, and may not be wider than the rear of the body.
Maximum Height 8" measured from the bottom of the chassis.
Spoiler must be attached to the body -- no spoilers directly attached to the suspension.
Windows may be cut out.
Openings for access to fuel tank, carburetor, and glow plug may be cut in body.
Front bumper must be made of energy absorbing material (nylon/kydex/foam), must be securely attached to the chassis, and may not be wider than the front of the body.

Engines/Exhaust
Any small block 3 port.12, or .15 RTR engines.
Fuel tank:75cc max. Inserts are not mandatory in factory tanks.
Maximum fuel line length from tank to engine,10” including one fuel filter.
Carburetors MUST HAVE a return device (spring, rubber band) to close the carburetor in the event the linkage comes off.
Tuned pipes are ok - no internal moving/adjustable parts.
No homemade or carbon fiber pipes.
One stinger only and must be permanently welded to pipe.
Pipes may only be modified for wire holds or pressure line ONLY

Tires/Wheels
2.2” diameter ONLY .
Rear wheel maximum width 2.5” .
Front wheel maximum width 2.0”
TRUCK TIRES ONLY. NO caps, silicone coated/impregnated, or sectioned tires.
Where foam tires are used, tires/wheels MAY BE trued/narrowed providing they are mounted on 2.2” diameter wheels, and meet the dimensions specified.

[RCRACR20]

Keith, that works for me. Since we are having a pro series race in july, I think its best we follow their rules for this class anyways.


If the weather cooperates, and the track is dried up enough to work on, we will try to have racing this friday night outside!!! Stay tuned!

[Junior]

Keith, that works for me. Since we are having a pro series race in july, I think its best we follow their rules for this class anyways.


If the weather cooperates, and the track is dried up enough to work on, we will try to have racing this friday night outside!!! Stay tuned!


Cool on the rules Matt, I was hoping you would say that so we would be the same. Looking at their rules, it appears that they have thought it out very thoroughly.


Keep us up to date on the outside track opener. Thanks.

[ScaryLarry]

The schedule looks fine, but when are you starting the schedule? The oval looks like it needs a bit of work. I'm looking forward to the outside oval, old guys like me have a hard time dealing with cold damp caves.

[RCRACR20]

If the weather cooperates, we will be racing this Friday. However, the forecast currently calls for rain. If it does rain, we will be racing in the Dungeon in fulton.


Matt

[RCRACR20]

As I mentioned above, we are going to try and race tomorrow if the weather cooperates. We begin racing at 7:30-8pm. $5 entry per class. If it is raining we will post on here and move racing to the dungeon in fulton.

[bushboy51]

I was wondering if anyone could send some pics. to me of danny alan and jack johnson cars. Im origanaly a native in Cortland NY. Ive moved to Kannapolis NC and have become an RC dirt oval driver--nitro EDM. I remember watching those guys up there, and would like to get me a body done up.

[bushboy51]

I was wondering if anyone could send some pics. to me of danny alan and jack johnson cars. Im origanaly a native in Cortland NY. Ive moved to Kannapolis NC and have become an RC dirt oval driver--nitro EDM. I remember watching those guys up there, and would like to get me a body done up. thank you.

[RCRACR20]

Due to scheduling conflicts, We have moved our outdoor asphalt road racing to Monday nights. All dirt oval racing will be on Friday nights. We have begun racing offroad and dirt oval outdoors already, and Onroad racing will commence in a couple of weeks. Any questions, call the shop at 315-532-6826

[DanTheEbayMan]

Due to scheduling conflicts, We have moved our outdoor asphalt road racing to Monday nights. All dirt oval racing will be on Friday nights. We have begun racing offroad and dirt oval outdoors already, and Onroad racing will commence in a couple of weeks. Any questions, call the shop at 315-532-6826


Man I REALLY Wise you were running the Dirt Oval on Sat or Sunday. I can't race on friday nights..