WTB RPM losi Front bulkhead and other upgrades

[aconsola]

I'm looking for an RPM Losi front bulkhead - #7330 this is for the
older JRX-2 jrx-T jrxpro and many other vehicles in their original
lineup. I am also looking for a rear bulkhead but I do not have the
part number for that.
I would be interested in any other hop-ups for this series.
I can buy a whole rolling chassis if it has one of the RPM bulkheads.
Thanks,
-Anthony

[97 ACME]

Losi came out with a new fr bulkhead for their first gas trucks. It's made of the white plastic
and is as good as the RPM. And most likely easy to find. It will work on the older JR's and
Pro's.
Butch

[aconsola]

Thanks for the info.
I aM building a period-correct hop-up car, so the white bulkhead won't work.
I did finally find an RPM bulkhead. It has 10 degrees of caster built-in, which brings the original 20degree short chassis plates up to the standard 30 degrees of caster.
here is what I've got so far on the jrx-2 aftermarket buildup:
http://www.rc10talk.com/viewtopic.php?t=1552
-Anthony

[wyldbill]

i do not recall any aftermarket rear bulkheads for losi's. i have looked evrywhere myself and had no success. i even had an old rpm parts list that had every part available on it and there was no rear bulkhead listed. they did however make 2 front 1 with 10 degrees and one stock with zero degrees, they ave very strong and virtually bullet proof. i was lucky to find one with zero degrees in an old parts box at my lhs and cleaned them out of old losi parts what little they had. the one thing i think youre car really needs is one of the grey xx retro fit trannys they are the best after market upgrades available. good luck in youre search there is a few vintage losi guys selling ebay i suggest you try their.