sprinter117
December 16th, 2006, 12:10 PM
Rules Amendments
Late Model side dam:
After hearing both sides of this debate and viewing the poll results we have decided that this season will be a “test” for the Late Model class and we are going to allow the side dam to be used. After this season we will evaluate the class and make amendments to this rule if necessary. The guidelines for the side dam in the rules will be strictly enforced so please do not try to stretch the rules or explore the grey area at all.
Wheels and Tires:
Sprint, EDM, and Late Model:
You may use either a 2.0 or2.2 buggy wheel with street treaded style tires only No production slicks!
Truck:
Must be truck tires on truck wheels (no Buggy wheels permitted)
Street treaded tires only No production slicks!
Truck Class Amendments:
No home made body’s no altering of roof height on production body’s
All trucks must use long truck arms: example is a RC10 Gt arm (arms do not have to be “production arms” as long as they are production length.
Motors:
All classes can run either .12 or .15 no .18’s allowed
Sprint:
Front wing measurement is 4”x2” with the side panels max 3” long and 1.5” high max of 1” must be above the horizontal wing surface
EDM:
Right rear tire must have at least 1/3 of the tread showing 360 degree angle
Late Model side dam:
After hearing both sides of this debate and viewing the poll results we have decided that this season will be a “test” for the Late Model class and we are going to allow the side dam to be used. After this season we will evaluate the class and make amendments to this rule if necessary. The guidelines for the side dam in the rules will be strictly enforced so please do not try to stretch the rules or explore the grey area at all.
Wheels and Tires:
Sprint, EDM, and Late Model:
You may use either a 2.0 or2.2 buggy wheel with street treaded style tires only No production slicks!
Truck:
Must be truck tires on truck wheels (no Buggy wheels permitted)
Street treaded tires only No production slicks!
Truck Class Amendments:
No home made body’s no altering of roof height on production body’s
All trucks must use long truck arms: example is a RC10 Gt arm (arms do not have to be “production arms” as long as they are production length.
Motors:
All classes can run either .12 or .15 no .18’s allowed
Sprint:
Front wing measurement is 4”x2” with the side panels max 3” long and 1.5” high max of 1” must be above the horizontal wing surface
EDM:
Right rear tire must have at least 1/3 of the tread showing 360 degree angle