JohnBoy72
October 19th, 2006, 1:56 PM
Ok, I'd like to either sell this or trade for the direction I'm now heading which is electric dirt oval. I have nothing at this time so I'm open for any reasonable offers. I plan on running a CW sprinter, 2wd EDM, and 4wd Late Model....maybe even Mini T's. It seems like I posted these cars up on the wrong site....:D
Losi XXX-NT Drake1
This truck is a near complete truck! I'm selling the complete electronics with the CEN. But I'll try to compensate by providing everything I have electronic wise....The truck is in excellent condition with just two exceptions...That graphite piece that mounts to the chassis and connects the rear hinge pins to the control arms....One of the eyes on the right rear is broke....I tore the truck down to replace this and while doing it, I sprayed off the a couple of metal parts...while doing this, Some over spray got on the nearby diff gear somehow....bad mistake. So I replaced the diff and put the gbx back together...somewhere I misplaced the rod for the brakes....so brakes and that right rear hinge pin holder...that's what it needs. It has a Pico XP that is fast as heck. I was doing the dang thing at the track. My lack of off road kept the thing from placing. I also have some rtr suspension parts a buddy gave me. I also have some original rims. As far as electronics...I have some older Futaba gear like: 2 Sport radios, 1 Magum/Junior raidio, about 4 servos, 2 rcv'rs (believe these are shot), etc. I'm also throwing in a XTM starter box.
CEN CT4S
I tried selling this awhile back in brand new off the shelf condition. No one took interest so I broke it in. It's had less than 1 1/2 gallons run through it. I'm selling with complete electronics...JR radio, rcv'r and 4 servos.....has fresh dodge ram body on it. Includes all the manuals I got with the car (very detailed). Threaded alum coil overs. Oh, I broke a left front a-arm. When the new kit from CEN came in, the arms looked stronger so I replaced all corners!!! I have the originals as well. It is painted and run a couple of times...in beautiful condition. A buddy gave me some other 2 spd nitro car that I'm including....I took it for turnbuckles and just to strip for parts....(the front diff housing mounting holes are broke)
Traxxas Nitro Rustler
This thing is for parts. Well rebuild the diff and it will be back together. It has $200 worth of alum rear suspension parts....shock tower, rear arms, chassis-hinge pin holder, hub carrier. I had a shop install and break in the 2.5 conversion....Duratrax threaded aluminum shocks....Extra dog bones or whatever traxxas calls there drives....
If interested, email for pictures...The baby is due in Mar....Leaving for Iraq in Jan....I'm wanting to get back into dirt oval when I return since a local shop built a track. So I'm getting rid of anything Nitro which is taking up space. I'm just wanting to make space, try to get their worth out of them to put towards the dirt oval fund.....:p Taking reasonable offers...will separate or sell as one....
Thank you
John boy
outkast_bigkuntre@excite.com
ok_clara@hotmail.com (wife's email since I'm extremely busy getting ready for deployment)
Losi XXX-NT Drake1
This truck is a near complete truck! I'm selling the complete electronics with the CEN. But I'll try to compensate by providing everything I have electronic wise....The truck is in excellent condition with just two exceptions...That graphite piece that mounts to the chassis and connects the rear hinge pins to the control arms....One of the eyes on the right rear is broke....I tore the truck down to replace this and while doing it, I sprayed off the a couple of metal parts...while doing this, Some over spray got on the nearby diff gear somehow....bad mistake. So I replaced the diff and put the gbx back together...somewhere I misplaced the rod for the brakes....so brakes and that right rear hinge pin holder...that's what it needs. It has a Pico XP that is fast as heck. I was doing the dang thing at the track. My lack of off road kept the thing from placing. I also have some rtr suspension parts a buddy gave me. I also have some original rims. As far as electronics...I have some older Futaba gear like: 2 Sport radios, 1 Magum/Junior raidio, about 4 servos, 2 rcv'rs (believe these are shot), etc. I'm also throwing in a XTM starter box.
CEN CT4S
I tried selling this awhile back in brand new off the shelf condition. No one took interest so I broke it in. It's had less than 1 1/2 gallons run through it. I'm selling with complete electronics...JR radio, rcv'r and 4 servos.....has fresh dodge ram body on it. Includes all the manuals I got with the car (very detailed). Threaded alum coil overs. Oh, I broke a left front a-arm. When the new kit from CEN came in, the arms looked stronger so I replaced all corners!!! I have the originals as well. It is painted and run a couple of times...in beautiful condition. A buddy gave me some other 2 spd nitro car that I'm including....I took it for turnbuckles and just to strip for parts....(the front diff housing mounting holes are broke)
Traxxas Nitro Rustler
This thing is for parts. Well rebuild the diff and it will be back together. It has $200 worth of alum rear suspension parts....shock tower, rear arms, chassis-hinge pin holder, hub carrier. I had a shop install and break in the 2.5 conversion....Duratrax threaded aluminum shocks....Extra dog bones or whatever traxxas calls there drives....
If interested, email for pictures...The baby is due in Mar....Leaving for Iraq in Jan....I'm wanting to get back into dirt oval when I return since a local shop built a track. So I'm getting rid of anything Nitro which is taking up space. I'm just wanting to make space, try to get their worth out of them to put towards the dirt oval fund.....:p Taking reasonable offers...will separate or sell as one....
Thank you
John boy
outkast_bigkuntre@excite.com
ok_clara@hotmail.com (wife's email since I'm extremely busy getting ready for deployment)