Hot Rod Concepts in full production

[reghammer]

Ok, first I'd like to apoligize to those that have been waiting months for kits. If you can
imagine a problem i've had it, All HRC kits are in the production stages including the
Mf MF/2 kit which has been revised & is rear or mid motor, the Bk Bk/2 kit in the same
configuration, the yet to be seen t4 & b4 kits are also in production. With any luck on my
side I'll have kits avail about 2-3 weeks max, hopefully sooner, I will get some pics up
shortly. We also have some new graphite goodies in the works and will have pics as well
i'm still out of state right now so this is the first chance I've had to post. To all the people
that had ordered previously e mail me at hotrodconcepts@hotmail.com, I have some
deals for you. if any one else has any questions please forward them to RCRACR20
in the mean time.

Reggie--

[twisted]

hey reg, you need somone to represent your car up here while your down south, im thinking a % sponsership. im not asking for a free car like some others might be. so lets talk.

[wait a minute]

hey reg, you need somone to represent your car up here while your down south, im thinking a % sponsership. im not asking for a free car like some others might be. so lets talk.


sorry george but thats allready been covered. just waitin for reg to send me my new ride.

[bmharwell]

Send me some pics. of the B4 Conversion when they're availible. bmharwell@fayelectric.com

[twisted]

sorry george but thats allready been covered. just waitin for reg to send me my new ride.

i was talking about a real driver, lol.

[k_bojar]

Do you have a website for info??

[wait a minute]

i was talking about a real driver, lol.


ok mr i aint got no shocks or to lazy to put them on.

[Matt Murphy]

Welcome back to NC Reggie. How did the move go? Glad to hear you are getting things going. Better start working on your Mod Truck for Coopers. I've been working very hard lately, on some very neat new things.

Good Luck,

Matt Murphy

[reghammer]

Hey man,

I'm back in NY for a few days. I'll catch up with everyone after Walt's Classic.

[OvalmanPA]

RCRACR20 or Reggie...............what's the latest news on kits?

[RCRACR20]

RCRACR20 or Reggie...............what's the latest news on kits?

Ive got them drawn up, burning them on a CD as I type, along with a file for front arms. Im going to be calling reggie for his address to mail it to him, and then it should only be a couple weeks after that before the chassis are in the mail.

Matt

[OvalmanPA]

Good to know. I've got XXX parts scattered all over my table waiting for a chassis. :)

[Jcr1104]

i wanna c some pics of theses kits plz email jcr1104@aol.com

[OvalmanPA]

Do a search they're already here.

[twisted]

the only pics that are up to my knowledge are the ones of the losi conversions. iam friends with reggie and the cars handle great. the b4/t4 i have yet to see. i thnk rcracer20 has some pics, but im not sure of that either.
i guess i dont know alot.

[bmharwell]

If anyone has some pics of this new chassis, please send to bmharwell@fayelectric.com . I'm about ready to buy something, and want the latest and greatest out there. LOL

[twisted]

which chassis? he makes a t4,b4 (both which i thin are prototypes) and the losi edm and lto losi truck.

[Lucky 7s]

Hi all

I run the HRC losi conversion truck - its awesome!

I think I even have some pics - I'll look


Matt/Reg

We have to talk about the web site!

- John

[bmharwell]

B4!!!!!

[Lucky 7s]

Here is the offset chassis - without the lowering kit

[Lucky 7s]

HRC XXXT with lowering kit

[wait a minute]

john, atleast ya could have done is clean up the tires before ya took a pic of it...lol

[Lucky 7s]

hey Mike

It just finished a race. It was cleaned after the pic! LOL

[reghammer]

Hey john vollick answer your cell phone!!

[wait a minute]

welcome back reg..so nice of u to return to the boards after being away for a while. :)

[RCRACR20]

pictures of the T4 conversion have been posted!!

[twisted]

pictures of the T4 conversion have been posted!!

wheres the b4 ?

[RCRACR20]

wheres the b4 ?

It will be the exact same conversion.


The Losi conversion is drilled for the XXX, XXXBK2, the XXXT and the XXXTMF2

The Associated conversion will cover the B4 and the T4. If need be, Ill temporarily convert my B4 over just to take pictures of it once Reggie gets one cut up and sent up to me.

I have also started working on a sprint car conversion for the B4, which will be extremely easy, just need to figure out what to do about a cage and body setup.

[reghammer]

Matt, I've allready built a sprint template for the b4 & it's mid motor optioned!, Call me on
my Cell#!!

[signman501]

reghammer what is you website. the like does not come thru. thanks

[reghammer]

The site should be up in 2 weeks

Reggie--

[OvalmanPA]

XXX kits done yet? I'm itchin' to get one together.

[reghammer]

So close, CNC cutter tells me 1-2 weeks (I hope he's right!!!!)

[OvalmanPA]

Get that guy on the stick! I've been hearing 1-2 weeks since August 21st. LOL

[RCRACR20]

The cutter has all the files now, so we're just waiting on him now.

[OvalmanPA]

What's the latest on progress with the conversion guys? It's fast approaching November now. Also, what's the website?

[RCRACR20]

I sent Reggie the CAD files, and he sent them along with the graphite to his machinist. We're just waiting on the machinist to set up whatever jigs and fixtures he needs to get them cut.

There will be a really trick Terminator chassis coming out along with the T4/B4 and XXX/XXXT conversions, not quite like anything else on the market

[OvalmanPA]

Ok guys........I saw a post in another thread here awhile ago that guys have moved on to other cars due to lack of product and I'm pretty close to doing the same. I don't want to be a dink as I'd REALLY like to try one of your chassis' as I like running Losi but this is getting ridiculous. What is the holdup with this cutter?? Reggie you told me in an email you'd "probably" have the kits ready to ship on 11/4 (after "probably" having them in your hands 10/31) and I sent an email out 11/5 with no reply as to if you were ready to accept $$$ and ship kits and no answer all week now either. I'll no way be able to have a car ready to go for our opening race next Sunday now. What happened to the website that was going to be up and running "in 2 weeks" about 2 months ago now? Maybe this post of HRC being in full production was a little hasty? :rolleyes:

[reghammer]

Ygm.

[DIRTDEVIL3]

anyone know if there is a web site too this shop??

[TQT2]

You guys will never learn......lmao!

[reghammer]

John Vollick (the creator of redneck rc's new site) is working on the project.