DD enforcer base line set up?

[Todd Manchester]

Finally dusting off the enforcer, haven't ran it in about 8 years. I got TC3 shocks on it and was looking for some sort of base line shock set up.

The track is more than likely going to be a little on the rough side ( I know not ideal for TC shocks, but it's either that or deltas at the moment.)

I was thinking 25-30 wt #1 pistons with maybe green or silver springs. But then again I could be way off too.

Thanks in advance.

[Matt Murphy]

25wt. Front #1 piston
35wt. rear #1 piston
Green springs on all 4
Unscrew shock ends 3 full turns for extra travel.

This is a baseline for a bumpy track. If too bouncy, try cut Blue buggy springs (softer).

Hope this helps,

Matt Murphy

[Todd Manchester]

Thanks.