Rc10gt Edm

[Troyer4k]

here is my RC10GT with a EDM body , FW shock towers & TC3 shocks. deck still isnt painted , will be white. also still havent found a good way to mount it , any ideas? thx in advance.

keith

[Daryl Lane]

Hi Keith

The rear shock tower has the two eyes for body mounting on the top, if you deck is stiff you can mount the rear that way. In the front add some on road body post to the front of the chassis near the servo.

[Troyer4k]

daryl ,

i was going to try to use the rear mounts on top of the rear tower , worked for my truck body but the edm body will sit way to low in the rear. i will make some new holes in the front of the chassis and get the mounts for that but rears im kind of stumped. not sure whats all out there for my application , my loacl hobby shop really doesnt deal with the GT or edm bodies that often so they are really no help lol. need to come up with 2 mounts for the rear that are kind of L shaped for mounting purposes. thx for the tech support , i do appreciate the efforts.

keith

[lawtonlosi]

what about a tc3 or xxxs rear body mount? They are long and have multiple holes so you can adjust them to what you need.

[Troyer4k]

thanks bud , i just went on the team associated site to check out the diagram of what they looked like and i'll be darned , they will work. thx again.

keith

[lawtonlosi]

No prob.

[Troyer4k]

what would be good to use for a front nose piece and mounts? just a flat piece of lexan? i dont want it to look too cheesy lol , i already have to put the scoop back a inch and a half further than id like due to hitting the front tower. thx guys

keith

[lawtonlosi]

Go to http://texasdirtoval.com/v-web/gallery there are a bunch of photos there that will give you some ideas.